Langues : 
These high carbon steel wires are used for the production of high pressure pipes, beams and poles.
These steel wires are produced in conformity with the following standards:
| Nominal diameter (mm) | Tensile strength class (N/mm2) |
|---|---|
| 4,00 | 1570 - 1770 - 1860 |
| 5,00 | 1570 - 1670 - 1860 |
| 5,50 | 1670 |
| 6,00 | 1520 - 1570 - 1670 - 1770 |
| 6,35 | 1650 |
| 7,00 | 1520 - 1570 - 1670 |
| 8,00 | 1570 - 1670 |
* Normal Relaxation (N.R.)
* Low Relaxation (L.R.)
* Very Low Relaxation (V.L.R.):
2,5% max after 1000 hours under initial load 70% of actual B. Load at 20°C.
| C | Mn | Si | P | S |
|---|---|---|---|---|
| 0,70 - 0,85 | 0,60 - 0,90 | 0,30 max | 0,035 max | 0,035 max |
Smooth or indented.
There are two types of indentation :
Wrapping with plastic film
There are three types
| Type | #1 | #2 | #3 |
|---|---|---|---|
| Inner diameter (mm) | ~1000 | ~1400 | ~1800 |
| Outer diameter (mm) | ~1450 | ~1750 | ~2200 |
| Coil weight (kg) | ~200 à 500 | ~500 à 1000 | ~700 à 2000 |
It is with pleasure that we inform you that we’ll be Exhibitor at Wire Dusseldorf, in Hall 16, booth B27, which will take place from April 16th to 20th, 2018.
En savoir plusWe hope to see you in Germany at INTERZUM 2015. We will be looking forward to see you at HALL 10.1 / STAND D045 between 05 – 08 May 2015
En savoir plusIt will be held April 26-28, 2015 at Houston, TX.
BP n°10 -Zone Industrielle Borj Cédria -2055 Bir El Bey -TUNISIE
Tél. : (+216) 70 242 450
Fax : (+216) 79 412 430
E-mail : marketing@maklada.com
 |
 |
 |
 |
 |
